Work With Stability,
Travel in Comfort
Exactly 60 years ago, the company ‘Ölhydraulik Altenerding’ began its track
record of success with the swing-axle cylinder. The ‘RH’ series took the
business, formerly family owned but since 2012 a part of Bucher Hydraulics,
to its position of global market leadership. With the ‘DRH’ series, a signicant-
ly improved successor now takes the stage. In parallel, the company has
introduced the ‘RM’, a solution for the new era of electrically powered
machines.
A solution for the new
era of electrically
powered machines
Bucher Hydraulics Fachartikel Technical Article
Mobile machines have to meet widely diering require-
ments. To get to the job site, they need good o-road
capability. While they are working, however, high rigidity
and stability are required. Added to this are the increas-
ingly demanding safety and environmental regulations.
This dual requirement is fullled by swing axles, which
can be locked when in working mode.
Swing-axle cylinders (SAC) are based on the principle of
the plunger cylinder, in which the piston rod serves as
the piston. When open (axle unlocked), they enable a ve-
hicle to drive over uneven terrain. The undercarriage can
then to a great extent follow irregularities in the terrain
without individual wheels lifting up and o the ground.
When closed, they lock the axle and thus ensure high
rigidity during working operations.
The cylinders are designed for secondary pressures up to
600 bar and require minimal installation space. As safety
components, they are responsible for the stability of the
mobile machine. A malfunction can result in the machine
toppling over, with disastrous consequences.
Swing axles are usually attached to the machine under-
carriage, while the hydraulic power supply is situated in
the rotatable superstructure. This means that the oil sup-
ply/return for the cylinders, as well as the control signals
for the valves, must be routed through a swivel joint.
New generation of swing-axle cylinders from
Bucher Hydraulics, with new body (on right).
Having just one axial port simplies produc-
tion, and two mounting screws instead of four
reduces the assembly work for the OEM.
Bucher Hydraulics Fachartikel Technical Article
Success from just one line
This was the starting point for the development of the
SAC from Erding, which at the time resulted in the RH
series (RH from the German for check valve with hydrau-
lic release i.e. pilot operated). Instead of the usual two
separate lines, the developers succeeded in combining
the pressure and control functions in one line. The key
feature: the valves open or close the ow path, depend-
ing on the pressure level. A dened pressure closes the
valve. To put it another way: the oil ow lls the cylinders;
its pressure switches the valves. This is signicantly more
energy ecient than the two-line solution.
Getting rid of one line halves the pipework costs, and in
addition only one connection through the swivel joint is
needed. As well as that, the RH series can be controlled
with just one inexpensive 3/2 valve.
The valving in the swing-axle cylinder usually consists
of a pilot-operated check valve that traps the oil in the
cylinder. When the control pressure exceeds a certain
value, the good area ratio within the valve enables it to
open against the pressure inside the cylinder. The swing
axle is therefore able to move thanks to an exchange of
oil between the cylinders.
There are other systems on the market in which the valve
opens abruptly when the limit value is exceeded. How-
ever, this behavior carries the risk that a heavily loaded
cylinder can suddenly give way, causing the machine to
tilt or even topple over.
A major safety issue with most of these solutions is hose-
or pipe-burst. Under no circumstances may it result in
instability of the machine. It follows, therefore, that the
pressurized oil in the cylinder must be prevented from
owing out. Any outow that occurs must be restricted
to a very slow rate.
RH series swing-axle cylinder in open (above) and
closed/locked positions (below).
Bucher Hydraulics Fachartikel Technical Article
More comfort and safety thanks to throttling
The newly developed and patented DRH (throttle check
valve, pilot operated) complements the Bucher Hydrau-
lics SAC range. In essence, it is a check valve with an ad-
ditional ow control function. The valve sits in a cartridge
that is mounted axially in the cylinder and includes the
port for the hydraulic line.
Inside the cylinder, the check valve is series-connected
with a ow control valve that throttles the outowing oil.
This throttling improves travel comfort and guarantees a
safe switchover from swing mode to work mode.
One further advantage: in line with the modular-system
principle, we now have a standard cylinder plus screw-in
cartridge valves with DIN or UNF threads. This reduces
inventories and improves serviceability.
Even greater stability thanks to preload integrat-
ed in the valve
Oil compressibility and other eects result in a settling
of the machine. This results in a few millimeters of clear-
ance between the cylinder rod and the axle pad on the
unloaded side, which can lead to increased wear if the
load changes.
With the DRH valve, when the swing axle is in locked
mode it can be recharged with only one line by applying
a specic tank preload pressure. This forces oil into the
unloaded cylinder, and the piston rod then rests rmly
on the axle without any gap. For the machine opera-
tor, this means stier and more controllable machine
behavior.
The integrated throttle check valve dampens any pres-
sure peaks that may occur in the control line when the
swing-axle cylinder is unlocked, thus preventing possible
damage.
The valve is extremely compact and requires very little
installation space in the SAC’s body, which is a machined
casting. In the event of a pipe- or hose-burst, the valve
closes automatically and goes into the closed/locked
position.
Even in the locked position, the new DRH
swing-axle cylinder from Bucher Hydraulics
can be recharged at normal tank line pres-
sures of between 5 and 13 bar.
Bucher Hydraulics Fachartikel Technical Article
‘RM’ for an electried future
E-mobility is also making inroads into mobile machinery.
At present it is still only the smaller machines that use
electric drives, but the trend is clear.
Bucher Hydraulics is more than prepared for this devel-
opment. With the type RM cylinder, the ideal solution has
been developed. Basically, it is a closed system, where
the oil just shuttles between the two cylinders.
In this case, an electrically actuated valve performs the
control function. The system needs only one electrical
line through the swivel joint.
Due to kinematic eects, small stroke dierences may
occur. These are compensated by a small oil accumulator,
which also provides constant pressure. This ensures the
same machine stability as with the DRH cylinder. The only
external connection that is required is an electrical one:
hydraulically, the system is completely self-contained.
The new swing-axle cylinders are available now – for an
environmentally friendly, reliable and safe future for
mobile machinery.
The RM swing-axle cylinder for electric
machines. The closed hydraulic system is in-
dependent of any on-board hydraulic system;
only an electrical signal is used to control
solenoid valves that are integrated in the
cylinders.
Bucher Hydraulics Fachartikel Technical Article
At a glance: the advantages of the RH/DRH
swing-axle systems
Swing-axle cylinder, type RH:
– High standard of safety thanks to integral shut-o/lock
valve
– Only one line to the cylinder
– Saves space
– Smaller cylinder with 600 bar rating reduces costs
– Withstands harsh operating conditions
– Expanded product portfolio
Additional functions, type DRH:
– Even more compact design reduces installation space
– All functions are provided with just one line
– Improved stability thanks to recharging in locked
position and to extremely low leakage
– Limiting the ow rate of the outowing oil improves
travel performance
– High opening pilot ratio (25:1)
Advantages of the self-contained RM
swing-axle system
– Closed hydraulic system
- No hydraulic control line to the undercarriage
is required
- No loss of pilot control oil
– Specic pressure preload in the cylinders
- Piston rods always rest on axle pad
– System recharges itself in the locked condition
- Very rigid behavior for safe operation
– Simple control via electrical signal
– Reliable, safe closing in any operating condition
– Valve technology proven in endurance tests
For swing operation, the valves open and the
oil can shuttle freely between the cylin-
ders; small stroke dierences and pressure
uctuations are compensated by a small oil
accumulator.
When the system is closed, the electrically
controlled valves lock the axle cylinders.
Bucher Hydraulics Fachartikel Technical Article
Bucher Hydraulics Fachartikel Technical Article
© Bucher Hydraulics GmbH / 10.2021
Subject to change without notice.
Contact for reader inquiries
Bucher Hydraulics Erding GmbH
D-85435 Erding
Info.ed@bucherhydraulics.com
www.bucherhydraulics.com
Contact for editors:
Marcel Knobloch
Sales Product Promotion
Tel.: +49 (0)7742 852 102